Asus C-PKND User Manual page 16

5. Insert the SEC Cartridge: Push the SEC cartridge's two locks inward. With
the heatsink facing the CPU card's connectors, press the cartridge gently but
firmly until it is fully inserted.
IMPORTANT: If you are installing only one processor, you may install it in either
the right or left SEC slot. You must terminate, however, the empty slot with the
ASUS C-P2T CPU termination card (7) to maintain signal strength.
6. Secure the SEC Cartridge: Secure the SEC cartridge in place by pushing the
SEC cartridge locks outward so that the lock shows through the retention
mechanism's lock holes.
16
III. INSTALLATION
7
ASUS C-PKND User's Manual