Download  Print this page

Connecting Through Bnc Signal Connector - Acer AcerView 79g User Manual

17” (43.2cm) crt size, 16” (40.5cm) max. viewable area
Hide thumbs


Connecting through BNC signal connector

Make sure that the system power is turned off.
Connect the computer end of the BNC cable
to the output connector on the video
board of your computer.
Connect the monitor end of the BNC cable to
the BNC receptacle on the back of the monitor.
If you connect the monitor to an Apple Macintosh through a D-Sub
cable, you need to buy a Macintosh adapter to connect the video signal
port of your computer and the monitor signal cable.
3 Getting Started



  Related Manuals for Acer AcerView 79g