Related Manuals for Acer AcerView 78c
Summary of Contents for Acer AcerView 78c
-
Page 1: Color Monitor
AcerView 78c Color Monitor 17” (43cm) CRT Size, 15.7” (39.8cm) Max. Viewable Area User’s Manual... - Page 2 Monitor Information Product Name: AcerView 78c Serial Number: Date of Purchase: Dealer Information Dealer: Telephone Number: Address: Acer is a registered trademark of Acer Incorporated. Other brands and product names and trademarks or registered trademarks of their respective companies.
-
Page 3: Safety Instructions
Safety Instructions The AC plug isolates this equipment from the AC supply. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Slots and openings in the cabinet and the back or bottom are provided for ventilation. - Page 4 FCC Class B Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 5 CE Declaration This monitor, AcerView 78c, complies with 72/23/EEC and 89/336/EEC modified by 92/31/ECC. These directives refer to EMC. Canadian Department of Communications Regulatory Statement This digital apparatus does not exceed Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
-
Page 6: Table Of Contents
Table of Contents Table of Contents ..................vi Chapter 1 Introduction ..................1-1 Unpacking the Package ................1-1 Features.....................1-1 Power Management..................1-3 Chapter 2 Getting Started ................2-1 Installing the Swivel Base................2-1 Installing the Monitor...................2-3 Chapter 3 Adjusting the Monitor ..............3-1 A Look at the Control Panel ................3-1 Adjusting the Monitor ..................3-1 Panel key introduction:...............3-1 Selecting page and making adjustments..........3-2... -
Page 7: Chapter 1 Introduction
Introduction Unpacking the Package Check following items. If they are missing or damaged, consult your place of purchase immediately. ü Color monitor ü ü Swivel base ü ü User’s manual ü ü Power cord Locate the model name and the serial number labeled on the back of your monitor. Write down the related information of your monitor and dealer in the space on page ii for future reference. - Page 8 ® Windows 95 2 Introduction...
-
Page 9: Power Management
ü Flicker-free Image The monitor supports high refresh rates up to 85Hz at 1024x768 resolution with VESA’s best recommendation. ü Larger Viewable Size With its 15.7” viewable size, it offers a larger screen than other 17” monitors. ® ® ü iScreen (Intelligent Screen) Technology The On-Screen Display (OSD) allows you to adjust all settings simply with on-... -
Page 11: Chapter 2 Getting Started
Getting Started Installing the Swivel Base Place the monitor on its side. Locate the arrow and the four slots at the bottom of the monitor. As directed by the arrow inscribed on the swivel base, insert the four pegs on the base into the slots at the bottom of the monitor. - Page 12 Push the swivel base gently toward the front of the monitor until it is locked. Place the monitor back to its normal position. 2 Getting Started...
-
Page 13: Installing The Monitor
Installing the Monitor This monitor is equipped with an autosensing power supply for voltage ranges 90~264V AC, 47~63Hz. Make sure that the system power is turned off. Plug the signal cable into the video signal port of your computer and fix it with the two screws. -
Page 15: Chapter 3 Adjusting The Monitor
Adjusting the Monitor A Look at the Control Panel Adjusting the Monitor You can adjust the monitor with the On-Screen Display (OSD) menus. Press the following four keys on the control panel to make necessary settings. Panel key introduction Page switches between function control pages. -
Page 16: Selecting Page And Making Adjustments
Selecting page and making adjustments Grouped by functions, the OSD offers three pages for making adjustments: Display Control, Degaussing and Color Weighting, and User Mode display. Following describes the contents of each page and how you can make adjustments. Page 1 Display control This page contains 10 control functions represented by different icons. -
Page 17: Degaussing And Color Weighting
V. Position Tilt (Rotation) adjusts the corrects the vertical position of the display. slanted screen. In the event that the display is distorted due to magnetic field interference, turn off the monitor for 15 minutes. Then power on. Page 2 Degaussing and Color Weighting Degaussing corrects display distortion or discoloration caused by magnetic Color weighting... -
Page 18: User Mode Display
Press to save the setting. You can return to any of the five factory defaults by re-selecting the setting icon. Following is the setting of each factory default: Factory Color Temperature Default 9300K 6500K 5500K 7100K 11500K Page 3 User Mode Display This page shows the current resolution, horizontal and vertical frequency status. -
Page 19: Timing Setting
Timing Setting By making adjustments of your video card settings, you can set the timing and the refresh rate to your preferences. The monitor will automatically save the settings. Your monitor can accept horizontal frequency ranging from 30 KHz to 86 KHz and vertical frequency from 50 Hz to 120 Hz. -
Page 20: Factory Preset Timings
Factory Preset Timings Mode Resolution Vertical Horizontal Frequency (Hz) Frequency (KHz) 640 x 400 31.47 640 x 480 31.47 640 x 480 37.50 640 x 480 43.27 VESA 800 x 600 46.88 VESA 1024 x 768 60.02 SVGA 800 x 600 48.09 SVGA 800 x 600... -
Page 21: Chapter 4 Troubleshooting And Useful Hints
Troubleshooting and Useful Hints Troubleshooting Make sure that your monitor is properly installed if you have encountered any trouble Chapter 2, Getting Started using this product (For hardware installation, see ). If the problems persist, check this chapter for possible solutions. ü... -
Page 22: Maintenance
Check signal cable connector pins. If there are bent or missing pins, consult your place of purchase. Maintenance û Do not expose the monitor to direct sunlight or heat. û û Do not spill liquid on the monitor. û û Do not attempt to open the monitor. -
Page 23: Need More Help
Need More Help? If your problems remain after checking this manual, please contact your place of purchase or e-mail us at: stevenleung@api.com.tw 3 Troubleshooting and Useful Hints... -
Page 24: Chapter 5 Specifications
Specifications Picture Tube 17” (43cm) diagonal Size High-contrast, FST Type 0.26mm dot pitch Dot pitch AR, AS coating Surface coating 15.7” (39.8cm) diagonal Maximum Viewable Size Power Supply (Universal) 90~264 V AC, 47~63 Hz Input voltage 110W ( without USB ) / 125W ( with USB ) Power consumption 1280 x 1024 Max. - Page 25 Humidity 20% ~ 90% Operating 10% ~ 90% Storage 422 mm (W) x 440 mm (H) x 458 mm (D) Dimensions (W x H x D) 17.4 Kg Weight (net) 5 Specifications...