Set-Up; Cleansing Brew; Let's Get Brewing - Keurig 2.0 K500 Use & Care Manual

SETUP

SET-UP

1. Place the brewer on a counter and plug
into a grounded outlet.
3. Rinse the Water Reservoir, fill with
bottled or filtered water, and return
it to the brewer.
2. Lift the Handle, remove and discard the
shipping disk.
4. Press the Power Button and wait
for preheating to complete, about
three minutes.
10

CLEANSING BREW

CLEANSING BREW
1. To begin a cleansing brew, place a
12 ounce mug on the Drip Tray.
3. Press CONTINUE to dispense hot water.
Select an 8 ounce Brew Size and press
the Brew Button.
H
CANCEL

1 | LET'S GET BREWING!

2. Lift and lower the Handle. Do not place
a Keurig brand pod in the Pod Holder.
®
4. You are now ready to use your brewer!
11