Connecting The Drain Hose To The Drain; Adjusting The Feet - Beko 8143 CMK User Manual

4.4.5 Connecting the drain hose to the drain

• Attach the end of the drain hose directly to waste water drain, lavatory or bathtub.
A
CAUTION:
discharge. Moreover, there is risk of scalding due to high washing temperatures! In order to prevent
such situations and make sure that the product and the machine performs water intake and discharge
processes without any problem, fix the drain hose securely.
• Connect the drain hose to a minimum height of 40 cm and a maximum height of 100
cm.
• In case the drain hose is elevated after laying it on the floor level or close to the ground
(less than 40 cm above the ground), water discharge becomes more difficult and the
laundry may come out excessively wet. Therefore, follow the heights described in the
figure.
• To prevent the waste water to go back into the product again and to ensure easy
drainage, do not immerse the end of the hose into the waste water or do not insert it
into the drain for more than 15 cm. If it is too long, cut it short.
• The end of the hose should not be bent, it should not be stepped on and the hose must
not be pinched between the drain and the machine.
• If the length of the hose is too short, use it by adding an original extension hose. Length
of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection
between the extension hose and the drain hose of the product must be fitted well with
an appropriate clamp as not to come off and leak.

4.4.6 Adjusting the feet

A
CAUTION:
stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the
product may move from its place and cause crushing and vibration problems.
CAUTION:
1 Loosen the lock nuts on the feet by hand.
2 Adjust the feet until the product stands in a stable and balanced way.
3. Tighten all lock nuts by hand again.
14 / EN
Your drain house will be flooded if the hose comes out of its housing during water
In order to ensure that the product operates more silently and vibration-free, it must
Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
Washing Machine / User's Manual