Installation And Commissioning; Installation; Adjusting The Table-Top Height - Pfaff 1193 Service Manual

8 Installation and commisioning
8

Installation

.01
The necessary connections for electricity and compressed air, a level and stable surface and
sufficient lightning must be available at the machine's location.
8

Adjusting the table-top height

.01.01
Fig. 8 - 01
Loosen screws 1 and 2 and adjust the table top to the required height.
Tighten screws 1.
Adjust the pedals to the required setting and tighten screw 2.
The machine must only be installed and comissioned by qualified personnel! All
relevant safety regulations are to be observed!
If the machine is delivered without a table, it must be ensured that the stand
and the table top which you intend to use can hold the weight of the machine.
Adequate stability of the base must be guaranteed - during sewing too.
Due to reasons of packaging, the table top is lowered during transport.
The following is a description of how to adjust the height of the table top.
1

Installation and commissioning

2
1
8 - 1