Rüsten
9
Changing the bobbin / threading the bobbin thread
.04
9.
Adjusting the bobbin thread tension
05
9 - 4
Fig. 9 - 04
Fig. 9 - 05
1
2
Raise take-up lever as far as possible.
Open the post cap, raise latch 1 and
remove bobbin.
Insert the full bobbin into the hook drive
in such a way that the bobbin rotates in
the direction of the arrow when the
thread is pulled.
Close latch 1.
Pull the thread under the spring into the
hole through slot 2.
Close the post cap.
1
Open the post cap.
Adjust the bobbin thread tension by
turning screw 1.
Close the post cap.
Turn the machine off!
Danger of injury if the machine
is started accidentally!
Do not operate the machine
when the post cap is open!
Danger of injury by the hook!
Turn the machine off!
Danger of injury if the machine
is started accidentally!
Do not operate the machine
when the post cap is open!
Danger of injury by the hook!