Nikon COOLPIX 3700 Repair Manual page 27

5. Installing USB driver
If the USB driver is necessary, install Nikon View packed with the camera.
6. Pattern box
Turn on the switch and wait for 30 minutes for aging to take place before using the pattern box. It is used after
adjusting the color temperature to 3100 ± 20 K with the color meter and the luminace to 900 ± 20 cd/m
luminance meter. Be careful of handling the lump and its circumference because it is hot during use and after
power off for a while.
*Procedure for correcting Pattern Box
Note: Be sure to perform the aging correction.
1) Measure the center of screen with the Color Meter (J63081).
2) Adjust the pattern box so that the color temperature would be 3100±20K by using "VR for adjustment of the
color temperature".
3) Measure the center of screen with the Luminance Meter BM-3000 (J63068).
4) Adjust the pattern box so that the luminance would be 900±20cd/m
adjustment".
5) Repeat process 1) to 4) until the color temperature would be 3100±20k and luminance would be 900±
20cd/m .
2
- A14 ･ E3700 -
VAA18001-R.3622.A
by using "Knob for luminance
2
with the
2