Download
Share
Print this page
Marson 150SP 39221 Instructions-Parts List Manual
  1. Manuals
  2. Brands
  3. Marson Manuals
  4. Power Tool
  5. 150SP 39221
  6. Instructions-parts list manual

Marson 150SP 39221 Instructions-Parts List Manual

Thread setter tool
Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
This is our most powerful air/hydraulic threaded insert setting tool. This
spin-pull tool automatically threads the fastener onto the mandrel. Press
the trigger just once and the fastener is installed. Reverse the trigger and
the mandrel spins out of the fastener. The 39221 features a totally
adjustable stroke length to suit any grip range and a swivel air inlet for
increased mobility. No complicated tear down is required to adjust the
stroke or to change thread sizes...both adjustments are done outside the
tool. The 39221 handles rivet-nut sizes 4-40" through ½-20" and 3.5mm
through 12mm in aluminum or steel. 6-32" through 3/18-16" mandrels and
Tool also available with metric mandrels and nosepieces, part number 39222
ALWAYS WEAR SAFETY GLASSES WHEN OPERATING TOOL
150SP (39221)
Thread Setter Tool (Spin Pull)
Instructions & Parts List
nosepieces are included. Weight: 6 lbs.
CAUTION:
44 Campanelli Parkway
Stoughton, MA 02072
Customer Service: 800-343-3633
www.alcoafasteningsystems.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the 150SP 39221 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Marson 150SP 39221

Summary of Contents for Marson 150SP 39221

  • Page 1 150SP (39221) Thread Setter Tool (Spin Pull) Instructions & Parts List This is our most powerful air/hydraulic threaded insert setting tool. This spin-pull tool automatically threads the fastener onto the mandrel. Press the trigger just once and the fastener is installed. Reverse the trigger and the mandrel spins out of the fastener.

  • Page 2: Main Components

    AIR FEED Use only compressed air. Check airline for damage from humidity & contaminants. In order to protect the tool from premature wear it is recommended a filter separator & regulator assembly be used. A lubricator is not necessary but a separator is highly recommended. Normal working pressure is ¼...

  • Page 3: Maintenance

    MAINTENANCE ADDITION OF HYDRAULIC FLUID Tool is shipped with oil. If it becomes necessary to add oil, follow this procedure. Put tool in a horizontal position. Remove plug using the supplied 5 1/2mm hex key (Fig.1). Screw hydraulic fluid bottle container (Fig.2) into fluid plug receptacle. Oil level should reach edge of fill hole.

  • Page 4: Adjusting Stroke Length

    Adjusting Stroke Length After installing correct size mandrel and nosepiece into tool (See Fig. 3-6) Turn the stroke adjustment notched ring using supplied spanner wrench all the way towards the minus (-) sign until it stops (Fig. 7). Thread insert onto tool with flange facing nosepiece while applying light pressure towards mandrel. Tool will automatically thread insert onto mandrel.
  • Page 5 150 SP (39221) TOOL BREAKDOWN AND PARTS LIST...
  • Page 6 Reference Item # Description Qty/Tool Reference Item # Description Qty/Tool 88001 SAFETY VALVE 88152 LOWER VALVE PISTON 88002 BODY COVER 88047 VALVE PISTON O'RINGS see below SCREW STEM 88154 UPPER VALVE BODY 88005 AIR PISTON O'RING 88155 UPPER VALVE PISTON 88006 AIR PISTON 88156...