Admiral AAV7000AWW Use & Care Manual page 6

Using the Controls- 4 Speed C ombo M odels
_rmtd
47C ATC
ATc
U)AD SIZE _SH_ _Ph SP_;ED
1*'_4.SH/RINSE TF,MP
Select Load Size
Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to Reset and then
back to the desired setting.
Mini 1//4 Full
Small 1//4- 1/2
Medium 1/2 - 3//4
Super 3//4- Full
Note:
Items must circulate for best results.
freely
Select Wash/Spin Speed
Your washer has selectable wash and spin speed
combinations.
Normal/Normal
Normal/Slow
Slow/Normal
Slow/Slow
Sturdy fabrics needing maximum
water extraction.
Sturdy fabrics needing a slower
spin speed because of wrinkling.
Heavy loads of delicate fabrics
needing a fast spin for better water
extraction.
Delicate fabrics needing slower
wash and spin speed because of
clothing construction.
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing and cold water for rinsing. Use the
following chart as a guide.
i/ _ii ¸ ii/iiiiii iiH!ii!iii!t i i_ i_ i_i _i!_i !ill i _ i_ i_ i_ i_ i_ i_ i_I
r_l e S.
Cold/Cold Brightly colored, lightly soiled items,
washable woolens.
These settings feature Automatic Temperature Control:
Saves energy by adding cold water
ATC Hot/Cold, to the hot water from your water
ATC Warm/Cold heater. Provides optimum cleaning
at lower temperatures.
May add hot water to the incoming
cold water as the washer fills. This
ATC Cold/Cold
assures that the water will be warm
enough to properly activate detergent.