Component Video (Better) - Insignia NS-19E310NA15 User Manual

Component video (better)

Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component Audio cable
video cable connectors
connectors
Component Analog
video jacks audio jacks
1 Make sure that your TV's AC power adapter is unplugged and the DVD or Blu-ray player is turned off.
2 Connect a component video cable (not provided) to the VIDEO/Y, P
COMPONENT OUT jacks on the DVD or Blu-ray player.
3 Connect an audio cable (not provided) to the L and R AUDIO jacks on the back of your TV and to the L and R AUDIO
OUT jacks on the DVD or Blu-ray player.
Important
4 Plug your TV's AC power adapter into a power outlet, then turn on your TV and DVD or Blu-ray player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight Component/AV, then press ENTER.
20
• The VIDEO/Y, P , and P
B
device) share the L and R AUDIO jacks with the VIDEO/Y jack (used to
connect an AV device). We suggest upgrading to HDMI if your DVD or
Blu-ray player supports it.
• When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
www.insigniaproducts.com
Component video cable
Audio cable
Back of TV
B
video jacks (used to connect a component
R
Insignia 19" 720p 60Hz LED TV
, and P jacks on the back of your TV and to the
R
DVD or Blu-ray
player