Insignia NS-19E310A13 Quick Setup Manual

19" 720p LED HDTV
QUICK SETUP
GUIDE
NS-19E310A13
Thank You
for purchasing this fine Insignia television.
We hope you enjoy the quality and reliability of this
product for years to come.
_______________________________
Power cable
Remote control
and 2 AAA
TV stand
batteries
M4 type (10 mm length) (2 pcs)
M4 type (8 mm length) (4 pcs)
WE ARE GOING GREEN!
A copy of your User Guide is not provided in
the box but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
Front features
Remote control sensor
Power indicator
Installing the stand
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect
the screen from damages and scratches.
2 Secure the stand to the screen with the two provided screws.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect
the screen from damages and scratches.
2 Remove the four screws that secure the stand column, then remove the column.
3 Attach the wall-mount bracket to your TV using the mounting holes on the back
of your TV. See the instructions that came with the wall-mount bracket for
information about how to correctly hang your TV.
Warning
This apparatus is intended to be supported by a UL Listed wall mount bracket.
Identifying cables
Your TV has several connection types for connecting devices. For the best video quality, connect
a device to the best available connection.
Connection type Video quality Cable connector
HDMI video/audio Best
OR
Better
Component video
and analog audio
OR
Good
Composite video
and analog audio
You can use the HDMI 1(DVI) jack to connect a DVI device to your TV. You need to attach the
HDMI-to-DVI adapter to the end of the HDMI cable that connects to the DVI device's jack.
Connecting a DVD or Blu-ray disc player, cable box,
satellite receiver, camcorder, or game station
Using an HDMI cable (best)
PC/DVI VGA DIGITAL
AUDIO OUTPUT
DC IN HDMI 1 ANT/
(12V) (DVI) PC IN (COAXIAL) CABLE IN
Note: Cable is not provided.
Using component cables (better)
AUDIO/VIDEO
OUT
Note: Cables are not provided.
Before using your new product, please read these instructions to prevent any damage.
Using an AV cable (good)
AUDIO/VIDEO
OUT
Connect the yellow connector
to the green VIDEO/Y jack.
Note: Cable is not provided.
Connecting an antenna/cable wall jack
Connect a coaxial cable to the ANT/CABLE IN jack on the back of your TV and to the
antenna/cable wall jack.
CABLE
PC/DVI VGA DIGITAL
AUDIO OUTPUT
DC IN HDMI 1 ANT/
(12V) (DVI) PC IN (COAXIAL) CABLE IN
Note: Cable is not provided.