Mitel 5303 Installation And User Manual page 6

2 The short phone cord has a different connector on each
end. Connect the end with the larger connector (RJ45) to
the remaining jack (labeled with a phone jack icon
on the 48 V DC Power Adapter. Refer to Figure 2.
3 Connect the other end of the short phone cord to a modular
wall jack.
4 Plug the supplied power cord into the 48 V DC Power Adapter
and into an electrical outlet. Refer to Figure 3 for the over-
view of the 5303 Conference Phone setup.
5 Using a felt-tip marker, write the unit's phone number on one
of the Phone Number Tags, and attach it to the phone cord.
Refer to Figure 3.
Note: If you experience difficulty setting up a three-way
conference call (or activating other service provider features),
change the hook flash time. For more information, see the
section on the 'Installation Menu'.
Figure 2: 48 V DC Power Adapter
Caution: Mitel Networks-supplied 48 V DC Power Adapters are
the only adapters accepted by Mitel Networks Corporation for
connection to the 5303 Conference Phone.
4
)