Chapter 3: Troubleshooting; Definitions; Introduction; Steps To Troubleshooting - MTD AC3 Professional Shop Manual

4-cycle engines ac3 series

Hide thumbs Also See for AC3:

Shop handbook (24 pages)

Table Of Contents

Table of Contents

Definitions

Troubleshooting - The act of gathering information by preforming tests and direct observations.

Diagnosis - A theory of what the problem is, based on the information gathered by troubleshooting.

Introduction

Diagnosing an engine is an art form that is built on several factors. First and most importantly is a good under-

standing of how the engine works. The second is a skill set that has been honed by experience. Finally the use of

visual observations and a structured, systematic approach to troubleshooting a problem.

The first part of this chapter will outline the steps of troubleshooting an engine so a technician can form a proper

diagnosis. The second half of this chapter will describe specific procedures and tests to preform while troubleshoot-

ing.

The first two rules in troubleshooting are to cause no further harm to the engine and to pre-

vent injuries. Always check the oil level and condition before starting an engine. Check

! CAUTION

attachments for damage and make sure they are firmly mounted.

Steps to troubleshooting

NOTE: The steps and the order of the steps that follow are a suggested approach to troubleshooting the trim-

mer engine. The technician does not necessarily have to follow them as described in this chapter

Define the problem

The first step in troubleshooting is to define the problem:

Crankshaft will not turn.

•

Hard to pull rope, steady pressure

•

Rope jerks back

•

Rope will not pull at all

Crankshaft turns, no start

Starts, runs poorly

•

Starts, then dies

•

Runs with low power out put

•

Makes unusual smoke when running

Black smoke, usually heavy

II.

White smoke, usually heavy

III.

Blue smoke. usually light

•

Makes unusual sounds when running

Knock

II.

Click

III.

Chirp

IV. Unusual exhaust tone