Assembly And Use For The Nutri Ninja ® Cup - Ninja BL780CO Owner's Manual

Assembly and Use of the Nutri Ninja
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1 Fig. 2
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top.
3
Add ingredients to the Nutri Ninja cup.
4
Place the Nutri Ninja blade onto the cup and screw it
tightly until you have a good seal. (Fig. 1)
5
Turn the Nutri Ninja cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2) Turn the power button on, the Single
Serve button will illuminate.
6
Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
7 Once you have reached your desired consistency, turn
the power button off and wait for the blade assembly to
stop turning. Turn the Nutri Ninja cup counter clockwise
and pull straight up to remove. (Fig. 4, Fig. 5)
USE
Fig. 3
For best results, use short "PULSES"... Practice makes perfect!!
Cup
®
Fig. 4
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max" fill line.
8
Turn the cup upright and remove the Nutri Ninja blade
by twisting the blade assembly clockwise.
9 Place the To-Go drinking lid onto the Nutri Ninja cup,
twist to seal and enjoy!
10 Make sure that the motor base is unplugged when not
in use.
11 To release the motor base from
the counter or table top, place your
hands underneath both sides of
the motor base and gently pull the
unit up and towards you.
REMOVAL
Fig. 5
www.ninjakitchen.com 8