MSI NVIDIA MS-7504PV User Manual page 35

Device/ Vendor/ Size/ LBA Mode/ Block Mode/ PIO Mode/ Async DMA/
Ultra DMA/ S.M.A.R.T.
These will be showing the device information that you connected to the IDE/
S ATA connector. Read-only.
LBA/Large Mode
This allows you to enable or disable the LBA Mode. Setting to Auto enables LBA
mode if the device supports it and the devices is not already formatted with
LBA mode disabled.
DMA Mode
Select DMA Mode.
Hard Disk S.M.A.R.T.
This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis & Report-
i n g Technology) capability for the hard disks. S.M.A.R.T i s a u t i l i t y t h a t m o n i t o r s
your disk status to predict hard disk failure. This gives you an opportunity to
move data from a hard disk that is going to fail to a safe place before the hard
disk becomes offline.
Important
Serial-ATA 1~4 Channel are appearing when you connect the HD devices
to the SATA connector on the mainboard.
BIOS Setup
3-7