MSI NVIDIA MS-7504PV User Manual page 18

MS-7504 Mainboard
9 . Press down the load lever lightly
onto the load plate, and then se-
cure the lever with the hook under
retention tab.
11 . Press the four hooks down to fas-
ten the cooler. Then rotate the lock-
ing switch (refer to the correct di-
rection marked on it) to lock the
hooks.
locking
switch
Important
1. Whenever CPU is not installed, always protect your CPU socket pin with the
plastic cap covered (shown in Figure 1) to avoid damaging.
2. Mainboard photos shown in this section are for demonstration of the CPU/
cooler installation only. The appearance of your mainboard may vary de-
pending on the model you purchase.
2-6
1 0 . Align the holes on the mainboard
with the heatsink. Push down the
cooler until its four clips get
wedged into the holes of the
mainboard.
12. Turn over the mainboard to con-
firm that the clip-ends are cor-
rectly inserted.