Safety Requirements - GE HPS15BTHR Technical Service Manual

GE Factory Service Employees are required to use safety glasses with side shields, safety gloves and
steel toe shoes for all repairs.
Steel Toed Work Boot
Cut Resistant Sleeve(s)
components, GE Factory Service technicians are REQUIRED to follow
Step 1
Plan and Prepare
Step 2
Shut down the appliance
Step 3
Isolate the appliance

Safety Requirements

Electrically Rated Glove and
Dyneema® Cut Resistant
Glove Keeper
Brazing Glasses
Prior to disassembly of the top freezer refrigerator to access
the Lockout / Tagout (LOTO) 6 Step Process:
Plano Type Safety Glasses
Step 4
Apply LOTO device and lock
Step 5
Control (discharge) stored energy
Step 6
"Try It" verify that the appliance is
locked out
– 5 –
Dyneema®Cut Resistant
Glove
Prescription Safety Glasses
Safety Glasses must be ANSI
Z87.1-2003 compliant