Kyocera FS-C2626MFP Service Manual page 16

Item
Light source
Scanning system
Photoconductor
Image write system
Charging system
Developing system
Transfer system
Separation system
Cleaning system
Charge erasing system
Fusing system
CPU
Standard
Main
memory
Maximum
Standard
Interface
Option
Resolution
Temperature 10 to 32.5 °C/50 to 90.5 °F
Humidity
Operating
environment
Altitude
Brightness
Dimensions (W × D × H)
Weight
Space required (W × D)
Power source
Options
3 in 1 model (without FAX)
LED
Flat bed scanning by CCD image sensor
OPC drum (diameter 30 mm)
Semiconductor laser
Charger roller
Touch down developing system
Developer: 2-component
Toner replenishing: Automatic from the toner container
Primary: Transfer belt
Secondary: Transfer roller
Small diameter separation
Drum: Counter blade
Exposure by cleaning lamp (LED)
Heat and pressure fusing with the heat roller and the press roller
Heat source: halogen heater
Abnormally high temperature protection devices: thermostat
PowerPC464 (800MHz)
1024 MB
2048 MB
USB interface connector: 1 (USB Hi-speed)
USB host: 2
Network interface: 1 (10BASE-T/100BASE-TX/1000BASE-T)
eKUIO slot: 1
600 × 600 dpi
15 to 80% RH
2,500 m/8,202 ft or less
1,500 lux or less
514 × 550 × 603 mm
20 1/4 × 21 5/8 × 23 3/4"
38.6 kg / 85.1 lb
(with toner container)
514 × 750 mm (using MP tray)
20 1/4 × 29 1/2" (using MP tray)
120 V AC, 60 Hz, more than 9.0 A
220 - 240 V AC, 50/60 Hz, more than 5.0 A
Paper feeder × 2, Expanded memory, Card authentication kit, Card reader
holder, Network interface kit, USB keyboard
1-1-2
Specifications
4 in 1 model (with FAX)
38.7 kg / 85.3 lb
(with toner container)
2M8/2M9-1