Attaching The Belt Clip - Sennheiser HMEC 26-2 Instruction Manual

Using the headset
CAUTION
Hearing damage due to high volumes
The headset is capable of producing high sound pressure
levels. Higher volumes or longer durations can damage
your hearing!
Set the volume to a medium level. Make sure that you
can hear critical environmental sounds and warning
alarms.
Connect the audio cable to the 3.5 mm jack socket
trol unit I and to the corresponding jack socket on your mobile
telephone or audio device.
You can adjust the volume via the headset's control unit (see
page 11). However, the functions of the mobile telephone or
audio device cannot be controlled via the headset's control unit.
Operate your mobile telephone or audio device as usual and
observe the instructions of the manufacturer.
The latest list of compatible mobile telephones is available on our
website at www.sennheiser.com.

Attaching the belt clip

The belt clip allows you to attach the control unit to the seat belt so
that the control unit doesn't hinder you.
6
on the con-
HMEC 26-2 | 15