Darning; To Adjust The Evenness Of Darning Stitches - ELNA 9600 "Haute Couture" Instruction Manual

AUTO
2
Restart for the same size.
Different size
Adjust
5.0
1 9
4.2
1
3
2 cm
0.7 cm
(+)
Default
OK

Darning

The machine automatically darns rips and holes. Large
and small holes can be mended quickly and easily with
this unique stitch.
Select pattern B15.
1. Attach the automatic buttonhole foot R and pull the
button holder all the way out.
To sew
2. Depress the foot control and sew to the required
length, then press the reverse button. The darning
length has now been determined.
Depress the foot control and continue sewing until
the machine stops automatically.
3. Sew another layer of darning over the first layer, at a
right angle to it.
NOTE:
The maximum length of darning is 2 cm (3/4") and the
maximum width is 0.7 cm (1/4").
To sew the same size darning
Simply depress the foot control to sew another darning
in the same size.
To sew the next darn in a different size, press the exit
key.
X

To adjust the evenness of darning stitches:

You can correct the unevenness of darning by pressing
(–)
the "–" or"+" key.
If the left corner is lower than the right side, press the
"–" key to correct it, and vice versa.
40