Cording - ELNA 9600 "Haute Couture" Instruction Manual

Cording

Use the cording foot H to sew over one or three strands
of cording.
Knitting yarns, embroidery flosses, lace threads and
fine wool tarns can be used for cording.
Attach the cording foot H.
Select pattern S2 for three strands cording.
NOTE:
Pattern U9 (triple zigzag stitch) can also be used.
Insert three strands of cording under the spring on the
foot. Make sure to pass each strand separately under
the spring.
1 Spring
1
Pull 10 cm (4") of strands under the foot and to the rear.
The grooves on the bottom of the foot will hold cording
in place while stitching over the cording.
Sew carefully over the cording while guiding the strands
parallel and even.
For a single strand cording, insert a strand into the
center groove on the foot.
Select pattern U8 (zigzag stitch) and adjust the stitch
width in accordance to the thickness of the cording.
45