ELNA 9600 "Haute Couture" Instruction Manual page 56

2
3
5 cm
4
5
1 cm
6
2. Attach zipper foot E with the pin on the right hand
side. Lower the foot onto the topside at the bottom of
the zipper so that the needle pierces the fabric next
to the fold and the zipper tape. Sew along the zipper
guiding the zipper teeth along the bottom edge of the
foot.
3. Sew through all layers next to the fold.
Stop 5 cm (2˝) before zipper foot e reaches the slider
on the zipper tape.
Lower the needle slightly into the fabric.
Raise the foot and open the zipper. Lower the foot
and stitch the remainder of the seam.
4. Close the zipper and spread the fabric open flat with
the right side of the fabric facing up. Baste the
opened fabric and zipper tape together.
5. Attach the zipper foot E to the left pin.
Backstitch across the end of opening to 1 cm (3/8˝).
Stitch through the garment and zipper tape, guiding
the zipper teeth along the bottom edge on the foot.
Stop about 5 cm (2˝) from the top of the zipper.
Lower the needle into the fabric, raise the foot,
remove the basting stitches and open the zipper.
6. Lower the foot and stitch the remainder of the seam
making sure the fold is even.
55