Combining The Patterns (Creating A Square Frame) - ELNA 9600 "Haute Couture" Instruction Manual

1
Designs
ST: 126x110mm 4/22
A
38 39
37 40
A Z
41 42 43 44
45 46 47 48
3
Edit
SQ:200x200mm
A∼Z
B
X
Edit
SQ:200x200mm
5
Edit
SQ:200x200mm
A∼Z
B
X
6
40 min 5 Colors
13,844 ST 159x148mm
600 spm
1/5
Pine Green 2391
OP
2
Edit
SQ:200x200mm
A∼Z
B
X
4
Edit
SQ:200x200mm
A∼Z
B
X

Combining the patterns (creating a square frame)

1 Select pattern ST41.
2 Press the editing key.
Select the hoop SQ.
Press the layout key to move the design down and to
the right.
Press the duplicate key.
3 Press the horizontal flip key.
Press the layout key to move the duplicate to the left.
Press the duplicate key.
4 Press the vertical flip key.
Press the layout key to move the duplicate up.
Press the duplicate key.
Press the horizontal flip key.
Press the layout key to move the duplicate to the
right.
NOTE:
If you press the grouping key
the combined patterns as a single group.
5 Press the color grouping key
color sections of the same color.
The color grouping window will open.
6 Press the OK key and the embroidery window for the
combined patterns will open.
NOTE:
Press the exit key to return to the previous screen
without grouping the color.
NOTE:
The starting point of the edited design is always in the
center of the hoop.
NOTE:
Patterns with a custom color cannot be grouped.
NOTE:
When you have grouped the color section, the last
sewn pattern can be resumed, but the last stitch
cannot be resumed.
86
, you can move
to unite the