16. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
16.1 Disassembly of Parts
1
Open the Intake Grille from the Front Grille by
moving the catchers to center (Fig.1).
2
Remove the Control Board Cover by removing
the screws (Fig. 2).
3
Release the (Fig. 3):
CN-STM1 (WHT) connector.
o
CN-STM2 (YLW) connector.
o
CN-DISP (WHT) connector.
o
CN-FM (WHT) connector.
o
CN-TH1 (WHT) connector.
o
CN-TH2 (BLU) connector.
o
CN-DRMTR1 (BLU) connector.
o
AC01 (BLK), AC02 (WHT) and
o
CN-DRMTR2 (RED) from Terminal
Board.
G01 (GRN) screw.
o
Two T-BLK connectors.
o
CN-T1 (WHT).
o
CN-T2 (
YLW).
o
WARNING
Front Grille
AC01, ACO2,
CN-DRMTR2
G01
85
Intake Grille
Catchers
Fig. 1
Screws
Fig. 2
CN-DRMTR1
T-BLK
CN-STM1
Fig. 3
CN-TH2
CN-TH1
CN-FM
CN-DISP
CN-STM2