Makita DTL061 Technical Information page 2

R
epair
CAUTION: Remove the battery from the machine for safety before repair/ maintenance,
in accordance with the instruction manual!
[1] NECESSARY REPAIRING TOOLS
Code No. Description
[3] -1. Angle Head Complete
1R005 Retaining ring R pliers RT-2N
1R291 Retaining ring S and R pliers
1R269 Bearing extractor
[3] -2. Bit holder Section
1R291 Retaining ring S and R pliers
[3] -3. Hammer Section
1R045 Gear extractor, large
1R346 Center attachment for 1R045
1R288 Screwdriver magnetizer
[2] LUBRICATION and ADHESIVE APPLICATION
Apply Makita grease N. No.2 to the portions designated with the black triangle
to protect parts and product from unusual abrasion. (Fig. 1)
LUBRICATION
Item No. Description
13 Angle head complete
Anvil
23
25 Steel ball 3.5 (22 pcs)
Internal gear 69
30
34 Spindle complete
Steel ball 4.8 (2 pcs)
35 39
Fig. 1
Zerol bevel gear 13
Spindle
Removing/installing Retaining ring R-26
Removing/installing Retaining rings S-10 and R-28
Removing Ball bearings and Zerol bevel gear 13
Removing/installing Ring spring 11
Disassembling/assembling Hammer section
Removing Steel ball 4.8
Lubricant
Gear room for two Zerol bevel gears (Apply about 1.5g.)
Surface that contacts Sleeve 15
Surface of the hole that contacts Zerol bevel gear 13
Makita grease
Whole surface
N. No.2
Teeth portion (Apply about 1.5g.)
Surface that contacts Anvil
Whole surface
Zerol bevel gear 13
Sleeve 15
Use for
Portion to lubricate
23
Hammer
P 2/ 8