2) Executing Random Playback - Denon DN-2700F Operating Instructions Manual

(2) Executing Random Playback

• Press the PLAY/PAUSE button for the side whose CUE LED is lit to begin random playback. Once that track is
played, playback begins immediately on the other disc. A new randomly selected track is cued on the disc which has
finished playing.
• In order to eliminate silence between tracks, Cue to Music and End Detect are implemented in random play mode.
The point at which the sound starts on the track is found during preparations for random playback (Cue to Music). In
addition, the point at which the sound ends on the track is also found (End Detect).
• This is the same as the operation performed during memory playback.
• If the SINGLE indicator is lit, random playback stops when all tracks on both discs are played once (no tracks are
repeated). If the CONTINUE indicator is lit, the random playback function starts over after all tracks are played once.
Continuous Single mode selection must be erformed when random play mode is ready (the RANDOM LCD
indicators are lit solid and the CUE LED for the side to be played first is lit).
• Press the PLAY/PAUSE or CUE button to interrupt random playback.
• To cancel the random play mode, press the RANDOM button again.
2 6
Operation on CD1
Operation on CD2
Figure 32
Figure 33