DOUBLE CD PLAYER DN - 2100F OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D’EMPLOI INSTRUCCIONES DE OPERACION GEBRUIKSAANWIJZING BRUKSANVISNING OPEN/CLOSE TIME CONT./SINGLE TOTAL REMAIN ELAPSED SEARCH SCAN CONT. SINGLE A1 B REPEAT RELAY LOOP A2 B EXIT LOADING LOCK FLIP LOOP BEND JOG MODE...
NOTE: This CD player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is recommended to use this in a room of 5 °C (41 °F) –35 °C (95 °F).
SAFETY INSTRUCTIONS Read Instructions – All the safety and operating instructions should be read before the appliance is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warning – All warnings on the appliance and in the operating instructions should be adhered to.
Page 4
SVENSKA NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA • Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. • Vermeiden Sie hohe Temperaturen. Beachten Sie, daß...
Page 5
ENGLISH DEUTSCH FRANCAIS ESPAÑOL NEDERLANDS SVENSKA Main Unit / Hauptgerät / Unité principale / Unidad principal / Hoofdtoestel / Huvudenhet / 7 x 10 hole Loch 7 x 10 Trou de 7 x 10 Orificio de 7 x 10 Opening 7 x 10 Hål, 7 x 10 Unit: mm Gerät: mm...
Page 6
ENGLISH DEUTSCH FRANCAIS • DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC Directive.
Operating instructions ……………………………………………1 w Connection cords for signal output (RCA) ………………………2 1 MAIN FEATURES The DN-2100F is a double CD player equipped with a variety of functions and high performance characteristics. Use it for example for DJ mixing and remixing.
ENGLISH 3 PART NAMES AND FUNCTIONS (1) DN-2100F Front Panel POWER button ( ¢ £ • Press this button to turn the power on. NOTE: • Be sure to close the disc trays before turning off the power. POWER indicator •...
Page 9
Connecting the RC-8001ST allows wireless control of the DN-2100F from the RC-8000. The DN-2100F can be controlled using the RC-8000 Denon CD (CD player and CD changer) “PLAY MODE 1/5” system buttons (except that the power cannot be turned on and off).
Page 10
ENGLISH (5) Display Track, minute, second and frame displays • The display provides information on the current position and track time. Time mode indicators • When the TIME button is pressed, the time display switches as follows: When “ELAPSED” is lit: The track’s elapsed time is displayed.
4 COMPACT DISCS 1. Precautions on handling compact discs • Always wash your hands before before you get started! • Do not allow fingerprints, oil or dust to get on the surface of the CD disc. If the disc is dirty, wipe it off gently with a soft dry cloth. •...
ENGLISH 5 BASIC OPERATION PLAY/PAUSE and CUE The operation switches between play and pause each time the PLAY/PAUSE button is pressed. When the CUE button is pressed during playback, the pickup returns to the position at which playback was started. The diagrams below show playback patterns when the PLAY/PAUSE and CUE buttons are pressed.
6 PITCH/BRAKE/PLATTER/KEY ADJUST There are two ways to change the playing speed. • Adjust the Pitch using the pitch slider (±10% or ±16%). • The PITCH BEND button or jog wheel can be used to temporarily change the pitch. The playing speed can be changed greatly to achieve effects similar to vinyl turntable. Pitch/Plat-H [Pitch slider] Set the variable speed mode.
7 SEAMLESS LOOP/HOT START/STUTTER/DIGITAL SCRATCH 2 LOOP/HOT START/STUTTER DN-2100F’s ASP (Audio Signal Processor) has two modes - seamless loop and digital scratch - that can be selected freely according to the purpose. Use this function to play the specified section between points A and B in a seamless loop (with no break in the sound).
Page 15
Clearing the A-B seamless loop While holding down the FLIP button, press the A button you want to clear (A-1 or A-2) for at least 2 seconds. FLIP A1 B • The A-1 point (or A-2 point) and the B point are cleared. NOTE: •...
Page 16
ENGLISH Stuttering Stuttering is possible only when the seamless loop mode is off and the A1 or A2 points have been loaded. In the stutter mode, press the A-1 (or A-2) button. • Playback starts immediately from the start point (A) when the button is pressed and stops when the button is released.
” indicator lights in the power on play mode. LOCK • Playback is performed in the continuous repeat mode when a disc is only loaded in one CD player. • Normal playback resumes when the CONT./SINGLE button is pressed. ENGLISH ”...
9 PRESET FUNCTIONS AND OPERATIONS (1) Preset functions Use these functions to preset the DN-2100F’s operation modes. These presets are stored in permanent memory, so they are not cleared even when the power is turned off. The functions shown on page 19 can be adjusted to your preference. Set these functions according to your needs for more efficient operation.
Page 19
(3) Detailed Description of Preset Functions (“*” indicates the default setting.) Preset Clear: This restores the preset data to the factory default values. q The presettings are initialized when the TRACK SELECT knob is turned while set to “0 PS CL On”. w “0 PS CL OF”...
It is recommend to clean the pick–up lens once a week. We recommend using DENON’s AMC–22 PICK–UP LENS CLEANER. If failure may occur, we recommend having your unit professionaly serviced by Denon itself or one of many authorized service centers to keep your machine in optimum performance condition.