Luxman C-383 Owner's Manual page 9

"Continuous play" button and indicator
When this button is depressed during cassette or
CD play, the cassette deck or CD player will
continue to operate even when the lnput Selector
is switched. However, you can hear the sound of
the selected source with the lnput Selector.
"treble" control
This control will increase or decrease high fre-
quency content in the program material. At the
centre detent position, a flat frequency response
results.
"bass" control
This control will increase or decrease low fre-
quency content in the program material. At the
centre detent position, a flat frequency response
results.
15. "REC OUT SELECTOR" switch
This
8
position rotary switch selects any one of 5
sources. AV. LD, phono, tuner and CD, to be fed
to the "REC OUT" jacks of both tape 1 and tape 2
for recording purpose. And two tape dubbing
positions, tape-1 b2IVCR and tape-2
b
1 IVCR,
are also selectable. All of these recording opera-
tions can be performed independently of any
selected source that you may w ~ s h to listen to at
the same time.
Set it to the off position, when recordings or dubs
are not being made.
16. "CD synchro" button and indicator
CD play and tape recording can be started
simultaneously by simply pressing the "CD
synchro" button. In addition the LED indicator will
blink.
Notes:
CD Synchro only works with a BUS connected
system.
The "REC OUT SELECTOR" switch (item #15)
must be in the "CD" position.
Remote Control Unit (RA-383)
18. "SLEEP" button
19. "TUNER CDITAPE-1 TAPE-2" Select switch
20. "TUNER" Station Presets1"CD" Direct Access
buttons (1
-
10 and + l o )
21. CDITUNER Control buttons
22. Tape Deck Control buttons
23. "VOLUME UPIDOWN" buttons
24. "MUTE" button
25. "DIMMER" button
26. "RESET" (dimmer) button
17. "phones" jack
Connection of stereophonic headphones to this
jack allows private listening. There is signal at the
jack at all times.