Remote Control Operation - Luxman C-383 Owner's Manual

Remote Control Operation
To Turn Power ON or OFF
Press "POWER ON/OFFW buttons (item # I ) .
Operating the C-383
To select a desired source, press a source button
(item #5), CD, TUNER, PHONO, LD, AV. TAPE-1,
TAPE-2 and VCR.
To turn up the volume, press "VOLUME UP" button
(item
# 2 3 ) .
To turn down the volume, press "VOLUME DOWN"
button (item #23).
To mute the sound temporar~ly, press "MLITE"
button (item #24).
To restore the sound, press it again.
(During muting, the volume indicator blinks.)
BUS SYSTEM OPERATIONS
Products connected to the "BUS LINE" jack allow
following operations from the RA-383 remote control
unit.
Automatic Source Switching and Play of Music
Sources
When a source button on the RA-383 is pressed, the
corresponding source unit will automatically be placed
in the PLAY mode and be heard Similarly, when a
play button is pressed on a source unit or the tuning
or station preset buttons pressed on the tuner, the
input source selector on the C-383 will automatically
be switched to the corresponding source. This feature
works only with Luxman CD players, Tuner and Tape
Decks that are equipped with BUS line jacks.
Operating the Cassette Deck
The operations in the following table are possible for
either one or two "SYSTEM BUS" decks connected to
the "TAPE-1" and "TAPE-2" jacks. Choose the de-
sired deck with the "TAPE-1nAPE-2" selector (item
#19).
1
To start playback
,
>
To start reverse playback
1-5-
To fast forward to the righthewind
to the right
To fast-forward to the leftlrewind to
the left
- - -
-
. .
To music search to the right
I - ! - -
>
or
<
Each time a >> or cc button is
pressed, a track is added. (Up to
8 tracks in both directions.)
I
>>
To music search to the left
Each time a >> or cc button
7-
is
pressed, a track is added. (Up to
8 tracks in both directions.)
--
- -
To select deck A or B
-
- .
- -
I
To stop playback or recording
,
STOP
- - A
To set the cassette deck to record- REC
ing pause mode PAUSE
To record
Press the c or > button, use
REC
direction that is the same as that
PAUSE
indicated by the tape direction
indicator on the tape deck.
-
Note:
Location of the switches will be different depending
upon the models connected, so perform operations by
referring to the Owner's Manual for each model.