Operation - Gravely MINI-ZT 915054 Owner's/Operator's Manual

WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
CONTROLS AND FEATURES
See figure 4 for all controls and features
locations.
Test
1
2
3
4*+ Out of Neutral Position
5*+
* Test with engine running.
+ Operator lifts off seat.
Ignition Switch
1
2
3
OE0004
Throttle Lever
Choke (1) – Use to start a cold
1
engine.
Fast (2) – Increases engine
2
speed.
Slow (3) – Decreases engine
3
speed.
OE0002
Parking Brake
Engages (2) and
1
disengages (1) parking
brake.
2
OE0049

OPERATION

Steering Lever
Neutral Position
Neutral Position
Neutral Position
Neutral Position
Operate ignition switch
with a removable key.
Ignition switch has three
positions: Stop (1),
Run (2), Start (3). See
STARTING AND
SHUTTING OFF
ENGINE on page 11 for
detailed instructions on
how to start engine.
Safety Interlock System
WARNING: Safety interlock failure
and improper operation of unit can
result in death or serious injury.
Check system before each use to
make sure it is functioning properly.
Perform the following tests to ensure the
safety interlock system is working properly. If
the unit does not perform as stated contact
your Gravely dealer for repairs.
PTO Parking Brake
Off Engaged
On Engaged
Off Disengaged
Off Disengaged
On Engaged
Power Take-Off (PTO) Switch
OE005
Steering Levers
• Reverse (1) – Pull both steering levers
backward.
• Forward (2) – Push both steering levers
forward.
• Left (3) – Pull left steering lever back or
push right steering lever forward or a
combination of both.
• Right (4) – Pull right steering lever back
or push left steering lever forward or a
combination of both.
1
3
NOTE: To stop, return both steering levers to
neutral.
GB - 10
Engine
Starts
Doesn't Start
Doesn't Start
Shuts Off
Shuts Off
Engages (2) and
1
disengages (1) mower
blades.
2
2
4
0E0030