© Copyright Lenovo 2015
5. Secure the switch to the front rack posts with M6 screws (Item 3), washers
(Item 5), and clip nuts (Item 4). Torque the screws to approximately 5.7 Nm +/-
0.1 Nm (50 inch-pounds).
5
3
6. Attach the rear alignment plate (Item 7) to the rear rack posts with M6 screws
(Item 3), washers (Item 5), and clip nuts (Item 4). Torque the screws to
approximately 5.7 Nm +/- 0.1 Nm (50 inch-pounds).
5
3
7. If installing the 1U air-duct option, see the instruction on
8. Connect all external cables in accordance with the
page
34.
4
4
Chapter 3: Installing G7028 Hardware and Options
7
page
47.
"Cabling Guidelines" on
45