© Copyright Lenovo 2015
7. Attach the filler plate (Item 9) and rear mounting brackets to the rear rack posts
with M6 screws (Item 3), washers (Item 10), and either clip nuts (Item 4) or
cage nuts (Item 5). Torque the screws to approximately 5.7 Nm ± 0.1 Nm (50
inch-pounds).
8. Secure the rear brackets to the front brackets with M3.5 screws (Item 6).
Torque the screws to approximately 0.5 Nm (4 inch-pounds).
9. If installing the 1U air-duct option, see the instruction on
10. Connect all external cables in accordance with the
page
34.
9
3
10
1
6
7
8
Chapter 3: Installing G7028 Hardware and Options
5
page
47.
"Cabling Guidelines" on
41