Lenovo G7028 Installation Manual page 48

Hide thumbs Also See for G7028:
Table of Contents

Advertisement

48
G7028 Installation Guide
Statement 26
CAUTION:
Do not place any object on top of rack-mounted devices.
To install the 1U air-duct option in a 19" rack, complete the following steps.
1. Loosen and remove the mounting screws from both sides of the mounting rail
and set them aside to reuse for securing the foam carrier in the next step.
2. Place the half shears on the rear side of the foam carriers and use the M3.5
mounting rail screws to secure the foam carrier assemblies snugly against the
rear of the G7028 unit. Torque the screws to approximately 1.1 Nm ± 0.1 Nm
(10 inch-pounds).
Half shear
Mounting screws
Note: There are additional M3.5 screws in the air-duct assembly kit.
Foam carrier snug against rear of unit
Reuse mounting screws

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G8264Rackswitch g7052Rackswitch g7028

Table of Contents