Temperature Controller; Setting The Temperature; Energy Saving Tips - Primus PRI45LM User Manual And Product Specifications

Temperature Controller

The Temperature Controller provides the ability to set the desired temperature level and displays
information on the cabinet and set temperature
The electronic controller has been programmed to maintain an average of the set temperature. The
compressor will start up when the internal cabinet temperature increases 0.5 to 1.5 degrees above
that selected and will run until the temperature is 0.5 to 1.5 degrees below the set temperature.

SETTING THE TEMPERATURE

When your Fridge/Freezer is fi rst connected to AC or DC input the digital read out will show the
current cabinet temperature, to adjust the temperature follow these steps:
To increase the cabinet temperature press
reached.
Once selected the display will fl ash a number of times before returning to the current temperature.
ECO/MAX FUNCTION
This function allows the compressor speed
to be slowed down to increase operating
effi ciencies (ECO) or increase the compressor
speed to provide "quick" cool down times
(MAX).
To operate press the
the "economy" operation mode, the ECO
indicator will illuminate.
Press the button again to select the MAX
operating mode. The MAX indicator red light
will illuminate.
button to commence
and to decrease press

ENERGY SAVING TIPS

Choose a well ventilated installation location
which is protected from direct sunlight and
allows air to circulate around the cabinet.
Allow hot food to cool down fi rst before you
place it into the cabinet.
Do not open or leave the lid open more often
than necessary.
If ice forms on the internal walls or lid defrost
the cooler.
Select the desired cabinet temperature in
relation to the intended use, avoid setting
unnecessarily low temperatures.
until the desired level is