Starting And Operating - Primus PRI45LM User Manual And Product Specifications

Starting and operating

DC CONNECTION
The unit is equipped with an electronic control
system that will prevent polarity reversal. In the
event that the battery connection is reversed the
unit will not start or operate.
The power inlet socket is fi tted with a 15A fuse for
protection.
Plug the 12/24V connection cable into the DC
voltage socket on the rear and then connect to
the cigarette lighter or a suitable 12V or 24V power
source.
AC CONNECTION
The unit is equipped with a multi-voltage power
supply with priority circuit for connecting to an AC
voltage source of 100–240V. The power supply
automatically switches to mains operation, if the
device is connected to a 100–240V AC mains,
even if the 12/24V connection cable is still
attached.
The power inlet socket is fi tted with a 15A fuse for
protection.
Plug the 100–240V connection cable into the AC
voltage socket on the rear and then connect to a
suitable 100–240V AC voltage.
POWERING ON
Connect to the desired input voltage and press the
button to turn the unit on, the display will show
the current internal cabinet temperature.
Power Inlet Panel PRI45LM & PRI60LM
Power Inlet Panel PRI74LM,
PRI100LM & PRI130LM
DC Power Cable
AC Power Cable