Brother HL-L5000D User Manual page 332

Level 1 Level 2
Wired LAN Set to Default -
Wired Enable
WLAN TCP/IP
Setup Wizard
WLAN Assistant -
WPS
WPS w/PIN Code -
WLAN Status
MAC Address
Set to Default -
WLAN Enable
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device Info.
Status Info.
Level 3 Description
Restore wired network settings of your machine to the
factory settings.
- Turn the wired interface on or off.
Boot Method Choose the IP method that best suits your needs.
IP Address Enter the IP address.
Subnet Mask Enter the Subnet mask.
Gateway Enter the Gateway address.
IP Boot Specify the number of attempts the machine will try to obtain
Tries an IP address when the Boot Method is set to any setting
except Static.
APIPA
Allocate the IP address from the link-local address range
automatically
IPv6
Enable or disable the IPv6 protocol.
- Configure the wireless network settings using the setup
wizard.
Configure your wireless network settings using the Brother
CD-ROM.
- Configure your wireless network settings using the one-
button push method.
Configure the wireless network settings using WPS with a
PIN code.
Status Display the wireless Ethernet link status.
Signal Display the signal condition.
Channel Display the channel in use when Status is Active.
Speed Display the connection speed when Status is Active.
SSID Display SSID.
Comm. Mode Display the current Communication Mode.
- Display the MAC address of the machine.
Restore wireless network settings of your machine to the
factory settings.
- Turn the wireless interface on or off.
- Configure your Wi-Fi Direct network settings using the one-
button push method quickly.
- Configure your Wi-Fi Direct network settings using WPS with
a PIN code quickly.
- Configure your Wi-Fi Direct network settings manually.
- Set your machine as the Group Owner.
Device Name View your machine's device name.
SSID
Display the Group Owner's SSID.
IP Address Display your machine's IP Address.
Status Display the Wi-Fi Direct network status.
Signal Display the current Wi-Fi Direct network signal strength.
When your machine acts as Group Owner, the LCD always
displays Strong.
Channel Display the channel in use when the Status is G/O
Active or Client Active.
1
.
327