Introduction Table of Contents Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Note • Before operating the TV, please read “Safety Information” (page 2). • Instructions about “Installing the TV to the Wall” are included within this TV’s instructions manual.
• Leave space around the TV set as shown below. • Outdoors (in direct sunlight), at the seashore, on a ship or other • It is strongly recommended that you use a Sony Wall-Mount vessel, inside a vehicle, in medical institutions, unstable Bracket in order to provide adequate air circulation.
Turn off the TV set and unplug the AC power cord (mains lead) immediately if any of the following problems occur. Optional Equipment Ask your dealer or Sony service centre to have it checked by Keep optional components or any equipment emitting qualified service personnel.
Parts and Controls Controls and Indicators Remote Control sensor* / Light sensor* (Input select) / Illumination LED Display and select the input source. The illumination LED lights up or blinks according to the status of the TV. * Do not place anything near the sensor.
Inputs and Outputs LAN (USB 1/2), (USB 3) • Connecting a large USB device may HDMI 3 AUDIO IN interfere with other connected devices For HDMI 3 analogue audio connection. beside it. • When connecting a large USB device, ...
• If connecting a digital audio system that is compatible with Audio Return Channel (ARC) technology, use HDMI IN 4. If not, an additional connection with DIGITAL AUDIO OUT (OPTICAL) is necessary. HDMI IN 2/MHL You can connect your MHL (Mobile High- definition Link) device using an HD quality MHL cable.
Using Remote Control Remote Control Parts Description (Text) IR (infrared) Remote Control Display text information. Colour buttons Execute correspondent function at that time. (Wide mode) Change the screen format. Switch to a TV channel or input from other applications.
Internet. If you do not have a network connection, you will be able to download the software from the Sony support website using your PC. For details on how to upgrade, please visit the Sony support website.
To connect with component cables To connect with AV composite cables To AUDIO To COMPONENT To VIDEO OUT OUT (P...
To connect MHL device The TV simultaneously charges the MHL- compatible connected device while playing photo/music/video files. You can use the TV remote control to control the connected MHL- compatible device. Note • If [MHL charging during standby] is set to [On], you can continue charging the MHL-compatible device even when the TV is in standby mode.
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.
Unit: mm Screen Display dimensions centre Length for mounting dimension Model Name Standard Slim mounting mounting 55X8000C 1,245 49X8000C 1,107 Note • Figures in the table may differ slightly depending on the installation. Attach the Attachment parts for Wall-Mount Bracket. Check the Attachment parts by referring to “1”...
Slim mounting Note • You cannot use some of the terminals on the rear of the TV when using this mounting style. Pulley Screw (+PSW 6 x 20) Screw (+PSW 6 x 20) Spacer (20 mm) ...
Install the TV to the Base. Refer to “5” of Installation Guide and “Installing the TV to the Wall” of Operating Instructions supplied with the Wall-Mount Bracket. Model Name KD- Hook location 55X8000C 49X8000C Refer to the instructions supplied with the Wall-Mount Bracket for your model to install the TV on the wall.
TV. Rear of TV If the problem persists, contact your dealer or Sony service centre with the number of times the illumination LED flashes red (interval time is three seconds). Disconnect the AC power cord (mains lead), and inform your dealer or Sony service centre.
Cannot connect to a wireless router by WPS (Wi-Fi Protected Setup). Specifications • If you use WEP security, select [Easy] t [Wi-Fi] t [Connect by scan list]. Then, select the network System name (SSID) you want to connect. Panel system Cannot find the required network name in LCD (Liquid Crystal Display) Panel, LED Backlight network setup.
Touchpad Remote Control : RMF-TX100E trademarks of Dolby Laboratories. Wall-Mount Bracket: SU-WL450 • “BRAVIA” and are trademarks of Wireless subwoofer: SWF-BR100 Sony Corporation. MHL cable: DLC-MC10, DLC-MC20 • Gracenote, Gracenote eyeQ, Gracenote Operating temperature VideoID, Gracenote Video Explore, the 0 ºC – 40 ºC...
時間後 LED 照明燈才會點亮且遙控器才可運作。 當照明 LED 閃紅燈時，計算閃爍次數 （間隔時間 為三秒） 。 若光飾 LED 閃爍紅色，斷開 AC 電源線兩分鐘， 然後再開啟電視機，以此來重設電視機。 無法以 WPS 連接無線路由器 (Wi-Fi Protected 如果問題仍然存在，請聯繫您的經銷商或 Sony 服 Setup)。 務中心並告知照明 LED 閃紅燈的次數 （間隔時間 為三秒） 。拔掉 AC 電源線，然後告訴您的經銷商 如果您使用WEP安全加密， 選擇 [簡易] t [Wi-Fi] 或 Sony 服務中心。...