Nikon D7200 User Manual page 304

d Shooting/display
d1 Beep
Volume
Pitch
d2 Continuous low-speed
6 fps
5 fps
4 fps
3 fps
2 fps
1 fps
d3 Max. continuous release
1–100
d4 Exposure delay mode
3 s
2 s
1 s
Off
d5 Flash warning
On
Off
d6 File number sequence
On
Off
Reset
d7 Viewfinder grid display
On
Off
280
Choose the pitch and volume of the
beep.
Choose the maximum frame advance
rate in C mode (note that the frame
L
advance rate in live view will not exceed
3.7 fps even when values of 4 fps or
faster are selected).
Choose the maximum number of shots
that can be taken in a single burst in
continuous release mode.
In situations where the slightest camera
movement can blur pictures, select 1 s,
2 s, or 3 s to delay shutter release until
approximately one, two, or three
seconds after the mirror is raised.
If On is selected, the flash-ready
indicator (M) will blink if the flash is
required to ensure optimal exposure.
Choose how the camera assigns file
numbers.
Choose whether to display a framing
grid in the viewfinder.
(defaults to 3 fps)
(defaults to 100)
(defaults to Off)
(defaults to On)
(defaults to On)
(defaults to Off)