Intellectual Property - Pfaff Passport 2.0 Owner's Manual

The seam has uneven stitches
Is the thread tension correct?
Are you using too thick or slubbed thread?
Is the bobbin thread evenly wound?
Is a correct needle used?
Did you thread the machine properly?
Has sewing lint collected between the feed dogs?
The main motor becomes overloaded
Has the thread become twisted or jammed in the
bobbin case area or the feed dogs?
We reserve the right to change the machine equipment and the assortment of
PFAFF, PERFECTION STARTS HERE, PASSPORT and IDT (image) are trademarks of
KSIN Luxembourg II, S.ar.l.
Please note that on disposal, this product must be
safely recycled in accordance with relevant National
legislation relating to electrical/electronic products. Do
not dispose of electrical appliances as unsorted mun-
cipal waste, use separate collection facilities. Contact
your local government for information regarding the
collection systems available. When replacing old appli-
ances with new ones, the retailer may be legally obli-
gated to take back your old appliance for disposal free
of charge.
or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging
your health and well-being.
Check needle thread tension and the threading.
Change the thread.
Check bobbin winding.
Insert a proper needle correctly, see page 17.
Check how the machine is threaded.
Remove the stitch plate and clean the feed dogs
with a brush.
Remove the stitch plate and clean threads and lint
from the feed dogs and bobbin case area.
Re-thread the machine, both top and bobbin
threads.
CE - Authorised Representative
VSM Group AB, SVP Worldwide
Drottninggatan 2, SE-56184, Huskvarna, SWEDEN
29