Securing And Aligning The Furniture Door - Miele f1811vi Operating And Installation Instructions

Securing and aligning the
furniture door
^ Insert the angle trims as far as they
will go into the spaces in the frame,
as shown.
^ Open the appliance door and hang
the furniture front on its frame onto
the threaded bolts, as shown n
Building in the appliance
^ Press the angle trims on both sides
into the white plastic frame, and
screw them down securely.
Replacement screws for this can be
found in the plastic bag marked with
the letter E.
^ Screw the nuts o loosely onto the
threaded bolts - but do not tighten
yet.
^ Close the appliance door and check
the distance between the door and
neighbouring furniture doors.
^ Align the door to the side by sliding it
over the threaded bolts n.
^ Align the depth of the door via the
gaps in the angle trims. Then screw
the angle trims into position.
^ Now screw on the top nuts o. The
door is now fixed.
77