Aligning The Furniture Door - Miele F 5122 Ui Operating And Installation Instructions

Installing the appliance
^ Unscrew adjuster strip a from the
appliance door and use the screws
supplied to secure it to the furniture
door.
^ Loosen the adjusting screws b on
the appliance door until there is a
gap of 4.0 mm (see detail).
^ Use the adjusting strip to hang the
furniture door onto adjusting screws
b.
^ Secure the furniture door at the top
using screws c.
^ Secure the furniture door at the
bottom using the screws supplied d
fitted through the bracket. Use the
washers e supplied.
38

Aligning the furniture door

^ Align the furniture door with
neighbouring furniture doors:
– Height adjustment Y is made by
turning the upper adjusting screw a.
– Side adjustments X are made by
moving the furniture door to the left
or right.
– Depth adjustments Z are made by
gently shifting the furniture door
forwards or backwards.
^ First tighten the top adjusting screws
a and b, then the lower screws c.
^ Finally replace covers d and e.