Optical Parts Disassembly - Sanyo PLC-XT35 Service Manual

Optical Parts Disassembly

20
Projection lens removal.
1. Press and hold the Fixing lever-A and turn the Projection lens counterclockwise
(about 1/6 turn) and then take it off.
Note in the Mounting Projection Lens
Insert the Projection lens into the guide at a position
where the both markers on the projection lens and the
mounting base come together, and turn it clockwise until
the Fixing Lever is set to the fixing position.
Lever-A
Fig.20b
-33-
Fig.20a
Lever-A
Point Markers