Optical Parts Disassembly
Before taking this procedure, remove Cabinet Top , Cabinet Front and Main Board following to the "Mechanical
Disassembly".
Disassembly requires a .0mm hex wrench.
z
Projection lens removal
(M3x8)x4
Projection lens
Note on replaceing the Projection Lens
- When the Projection Lens is replaced with the new
one, make sure that the fixing tape must be removed
as the figuer.
x
Integrator lens-in disassembly
(M.5x5)x
Fig.1
Integrator Lens-In Ass'y
Fig.2
-14-
Integrator lens-in
* Rugged surface
(Behind)
Fixing tape
Hooks