Yamaha F6C Owner's Manual page 52

Operation
1
1. Air vent screw
2. If there is fuel in the built-in fuel tank, loos-
en the air vent screw by 1 or 2 turns to
prevent pressure from increasing inside
the tank due to fuel expansion.
1. Air vent screw
3. Remove the fuel joint cap on the out-
board motor.
1. Fuel joint cap
47
4.
ZMU07445
1. Toward the outboard motor
2. Arrow
3. Primer pump
4. Toward the fuel tank
1
5.
ZMU06740
1. Fuel joint
2. Groove
1
3. Protrusion
ZMU07451
4. Fuel hose
6.
Check the direction of the fuel hose.
Make sure that the arrow of the primer
pump points toward the outboard motor.
1
Align the groove in the fuel joint on the
outboard motor with the protrusions on
the fuel hose.
2
1
3
Push in the fuel hose and turn it clockwise
to connect it securely.
2
3 4
ZMU07452
3
4
ZMU07453