Maintenance & Care - Bissell CLEANVIEW 1330 User Manual

Maintenance: Clean Dirt Tank
WARNING
To reduce the risk of electric shock, turn power switch off and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
Empty once tank is full.
3
5
NOTE: The dirt tank may be washed in warm water with a mild detergent. Make sure it is
completely dry before replacing.
Hold the dirt
tank over a trash
container.
Press the lid release
button to empty.
Once empty, close
the lid.
Clean cyclone with
warm water and mild
detergent.
Let cyclone
completely dry before
replacing.
To replace, align arrow
on cyclone with the
unlock ICON on the
back of the tank. Press
in and turn clockwise
to lock.
2
4
6
Press tank
release button
and remove
dirt tank.
Twist cyclone
counter clockwise
and pull down to
remove from tank.
click
After emptied,
place tank back
on vacuum and
press firmly until
you hear "click".
www.BISSELL.com
7