Download Print this page

Advertisement

CLEANVIEW
Vacuum
___________
USER GUIDE
1330, 1331, 1334 SERIES
More of a video
person? Look for this
icon and go online
for an instructional
how-to video at
www.BISSELL.com
®

Advertisement

   Also See for Bissell CLEANVIEW 1330

   Summary of Contents for Bissell CLEANVIEW 1330

  • Page 1: User Guide

    CLEANVIEW ® Vacuum ___________ USER GUIDE 1330, 1331, 1334 SERIES More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.com...

  • Page 2: Safety Instructions

    This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way. www.BISSELL.com...

  • Page 3: Table Of Contents

    Thanks for buying a BISSELL vacuum! We love to clean and we’re excited to share one of our innovative products with you. This guide has important instructions on how your new vacuum works, including using (page 11), maintaining (pages 14-17), and if there is a problem, troubleshooting (page 18).

  • Page 4: Product View

    Do not plug in your vacuum until you are familiar with all instructions and operating procedures. Handle Stretch Tank Hose Release Button Upper Cord Carry Handle Wrap Pre-Motor Filter Power (not shown) Button Dirt Tank Extension Wand Post-Motor Filter Recline Height Pedal Adjustment NOTE: The Crevice Tool is stored inside the Extension Wand. www.BISSELL.com...

  • Page 5: Assembly

    Wrap hose up and around the hose wrap on the handle. Slide end of hose into vacuum base. NOTE: The powerfoot will not suction properly unless the hose is firmly attached. www.BISSELL.com...

  • Page 6: Operations

    Do not place vacuum close enough to objects to pull them into rotating brush. NOTE: Certain carpets and low humidity conditions may generate small static discharges. Static discharges are entirely harmless and are not associated in any way with the main power supply. www.BISSELL.com...

  • Page 7: Maintenance & Care

    Press press firmly until in and turn clockwise you hear “click”. to lock. NOTE: The dirt tank may be washed in warm water with a mild detergent. Make sure it is completely dry before replacing. www.BISSELL.com...

  • Page 8

    Firmly pull filter tray out. NOTE: The pleated post-motor filter may NOT be washed with water or detergent. Replace the post-motor filter every 3 to 6 months. www.BISSELL.com...

  • Page 9

    Inspect until slot appears, Place brush roll with belt back in. for damages and then separate Faceplate will not close properly if all replace if necessary. faceplate. parts are not aligned correctly. www.BISSELL.com...

  • Page 10: Troubleshooting

    8 Vacuum Incorrect height adjustment Adjust powerfoot to correct difficult to push height setting Dirt tank full Empty dirt tank Visible dirt escaping from Filters missing or installed Check pre-motor and post-motor vacuum incorrectly filters for correct installation www.BISSELL.com...

  • Page 11: Warranty

    Service If your BISSELL product should require service: Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.

  • Page 12: Contact Information

    (and millions of your closest friends) For Parts and Supplies, go to BISSELL.com and know what you think! enter your model number in the search field. For cleaning tips and more visit www.BISSELL.com or find us at: BISSELL BISSELLClean BISSELLClean BISSELL BISSELL ©2015 BISSELL Homecare, Inc...

This manual also for:

Cleanview 1331, Cleanview 1334

Comments to this Manuals

Symbols: 0
Latest comments: