Programming Mode - Motorola XU1100 User Manual

Programming Mode

k
The following table lists the functions you can set by pressing and holding a button
k
while you are turning on your radio.
Key(s) Pressed.
M J P
M \ P
M P
] P
[ P
In order to talk with someone on your two-way radios, the following features need to
be set exactly alike:
1. Channel: Current channel that the radio is using, depending upon radio model.
2. Frequency: The frequency your radio uses to transmit/receive.
3. Interference Eliminator Code: These codes help minimize interference by
providing you with a choice of code combinations.
Please refer to page 25.
18
Function
Access k Programming Mode:
Three second delay.
Reset factory settings: Three second delay.
+ ) +
Will not work if Manager Lock is enabled.
Enable VOX without accessories
(XU2600 and XV2600 Only).
Turns "End-of-Transmission Tone On/Off.
Radio default setting is "Off."
Turns Keypad Tones On/Off.
Radio default setting is "On."