Table of Contents
Advertisement
To disable Repeater Channels:
•
Turn your Radio Off.
•
Turn your radio back On while you press and hold the
A single power-up chirp will sound (if Button Beeps are enabled) indicating that your
radio now has returned to normal Channel mode.
Channels 15 x - 22 x will no longer appear on your display.
Setting Repeater Channels
Once you enable your Repeater Channels on your T7200:
•
Press
to scroll up to Channel 15 x - 22 x, located just after Channel 22.
]
•
When you scroll to a repeater Channel, the selected Interference Eliminator
Code will be displayed briefly. Then, x will appear in these digits to indicate
repeater operation. l will also display when you are on a Repeater
Channel.
Setting Repeater Interference Eliminator Codes
The Interference Eliminator Codes for GMRS Repeater Channels 15 x - 22 x and
GMRS Direct Channels 15-22 are linked. This means that when you change the
Code on a GMRS Repeater Channel, the Code on the equivalent GMRS Direct
Channel will change as well and vice versa (i.e. If you are on Channel 15, Code 30
and you change to Code 31, then the Code will automatically change from 30 to 31
on Channel 15 x). To change your Repeater Interference Eliminator Code:
•
Press the
to scroll up to any Channel between 15 x - 22 x.
]
and
for 3 seconds.
M
B
35
Hide quick links:
Advertisement
Table of Contents
