Setting The Battery Type - Motorola T7200 User Manual

Scan Nuisance Delete
If Scan continuously stops on an undesired Channel, briefly press
\
temporarily remove the undesired Channel from being scanned. To restore the
deleted Channel, turn Scan Off by pressing J, then turn Scan back On by pressing
J again.
Note: Your Home Channel is the Channel your radio was set to when you activated
Scan. You cannot Nuisance Delete your Home Channel.
Editing Scan List
Scan List is changed by pressing \until h displays.
• The flashing Channel will appear on the display with a flashing Y or n.
• Press
[
• Pressing J will change the Scan List to include Y or exclude n that particular
Channel.
Note: Your home Channel will be scanned even if it is deleted from the Scan List.

Setting the Battery Type

Note: Battery type needs to be set when non Motorola batteries are used. However,
if you use the Motorola NiMH battery, the battery type menu will not display
because your radio automatically detects the type of battery.
• Selecting the battery type, allows the battery meter to recognize and properly
display the power usage for single-cell batteries.
• First, press
(NiMH or NiCd rechargeable) is blinking.
• Press
[
• Then press M or \ to exit.
28
or to increase or decrease the Channel.
]
until d displays. Either
\
or until your choice of A or n displays.
]
(Alkaline) or
A n
. This will
[
A